Closed-cell foam for the inside of steel shops, farm buildings, hangars, and new pre-engineered buildings around Carlsbad, Loving, and Otis. It slows the heat coming off sun-baked panels and seals the laps and fastener holes.
Schedule a VisitMetal Building Insulation in Carlsbad
Steel buildings in Carlsbad come in every age. Some are farm shops and hay barns that have stood in the irrigated Pecos valley for decades. Others went up in the last few years as drilling in the Delaware Basin brought new yards, warehouses, and shops to town. Left bare, they all fight the same summer. By mid-morning the roof is too hot to touch, and the panels pour that heat down on whoever is working underneath until evening. A cooler or mini-split in there runs nonstop and still loses ground. On a clear winter morning the same roof goes cold, and moisture from people, trucks, and wet equipment collects on it and drips.
The fix goes on from the inside. Closed-cell foam sprayed onto the underside of the roof and the inside of the walls grips the steel, fills every lap and screw hole, and helps stiffen thin panels. The added rigidity depends on the product, thickness, and construction. The roof still bakes, but far less of its heat gets through to the room, so your cooling has a chance to keep up. Panel insulation can help manage condensation, while indoor moisture, ventilation and any roof leaks still need attention. On older buildings we check rust, old coatings, and sagging blanket before pricing the prep.
For an existing Carlsbad building, tell us which walls and roof areas we can reach and whether equipment or stored goods can be moved. During a visit, we check what preparation and insulation work is needed. For a new building, send plans before interior finishes go in. The written estimate lists the work and any specified protective coating.
Step 1
We check the panels and what is on them now, how the building is used, and what has to keep running while we work.
Step 2
Equipment, stock, doors, and floors get covered, and the steel is prepped so the foam bonds to it.
Step 3
Closed-cell foam goes onto the roof and wall panels to the thickness in the estimate, plus any thermal or ignition barrier coating the building’s use requires.
Step 4
We go over coverage and thickness against the estimate and walk the building with you before we pack up.
Also serving: La Huerta, Happy Valley, Otis, Loving, Malaga, Whites City.
Our work
See our work in other communities we serve. Each gallery names the town.
Roswell, NMA clear-span steel building in Roswell with spray foam under the whole roof and down the walls, sprayed around the roll-up doors and walk-in doors.
Capitan, NMA steel building in Capitan with framed rooms inside: foam in the stud walls and ceilings of the rooms, and on the roof panels over the open bay.
San Patricio, NMSpray foam in the framed walls of a steel building in San Patricio, in the Hondo Valley, around a roll-up door, plumbing lines and a small room.
Guides
Send a few photos plus the length, width, eave height, and how you use the building, and we’ll arrange a site visit or review your plans before preparing a written estimate.
